Spark Plug Wire Cover Installation

This is a Zetec-Only Under-hood aesthetic hack, but it really adds to the fit-and-finish appearance.

Tools Needed: Minimalistic Socket set. (9MM Socket I believe is all you need) Time Required: 10 Minutes Procedure: Pop The Hood and prop it open Remove the two small bolts in between the cam covers on the top of the engine. Place the spark plug cover in the groove between the cam covers. Line up the notches properly with the indentations for the bolts. Re-Install the bolts through the holes in the Spark Plug Wire Cover. Drop the hood!

comments powered by Disqus